Recommendations for the use of high and low voltage electroscope
High and low voltage electroscope: Also known as angle-adjusting electroscope, high and low voltage general electroscope, pocket electroscope, etc., its characteristic is that the indicator part of the electroscope can adjust the angle at will to make the electroscope convenient, and it can be adjusted 180 degrees when carrying it, which can make the length of the electroscope only 15cm, which is easy to carry!High and low voltage electroscope: Also known as angle-adjusting electroscope, high and low voltage general electroscope, pocket electroscope, etc., its characteristic is that the indicator part of the electroscope can adjust the angle at will to make the electroscope convenient, and it can be adjusted 180 degrees when carrying it, which can make the length of the electroscope only 15cm, which is easy to carry!
Pocket electroscope series products：
(1) Folding GDY-WBZ0.1-10KV: shrink state 15cm, stretch length 60cm.The head can be folded up and down.
(2) GDY-S0.1-10KV: shrink state 18cm, stretch length 80cm.
(3) GDY-0.1-10KV: shrink state 18cm, stretch length 80cm.
(4) GSY-0.1-10KV: shrink state 18cm, stretch length 80cm.
Specification details are suitable for 0.1-10kv voltage level use
Recommendations for the use of high and low voltage electroscope
1. In order to ensure the safety of the person and equipment, the electroscope should be stored in a place with air circulation and a dry environment.
2. The operation of power inspection shall be carried out in strict accordance with the relevant provisions of the work regulations of the electricity industry.
3. Choose a suitable electroscope according to the rated voltage.
4. Before the power test, press the self-test button. The power test should emit a continuous gap-type sound and light signal. If there is no power test operation, the power test operation must be carried out.
5. The operator must hold the handle in his hand and pull out all the operating rods before they can be used.
6. In the case of non-total power outages, the electroscope should be tested on the part where there is electricity to ensure that**.In the case of all power outages, the power inspection operation can be carried out before the power failure or in other places where there is electricity, to prove that the electroscope is intact and ready for use.
https://www.mindereye.com Bird Repellent
页:
[1]